Accessories

A number of accessories are available for the Concept2000 and the Concept 2000XP system including:

- Push buttons and bus interfaces

- Bus cables

- Remote controls

Certain accessories can be used only in the Concept 2000XP or Concept 2000. Other accessories can be used in both systems.

CP79 Conkey: Remote control to program Concept 2000

CONSON ACCESSORIES - CP79 Conkey: Remote control to program Concept 2000
The Conkey CP79 is a remote control for programming the Concept 2000. The CP79 has an LCD display and a 5-way keypad.

The front end of the remote control has IR diodes for communication with the modules of the Concept 2000 or most of the new Concept 2000XP. The remote control can also be used for controlling the Concept 2000 installation. See description of the the link modules CP70A and XP70A or the bus interfaces XP2506A and XP28A. It may also be used to control audio/video channels from Bang & Olufsen.

The battery compartment is located at the rear end of Conkey CP79 and three terminal strips are required to charge the battery using the wall bracket (CP2520, CP2521 or CP 2522).
 

CP07: Bus cable for horizontal connection

CONSON ACCESSORIES - CP07: Buscable for horizontal connecting
20cm bus cable (3 colors wires) for horizontal connection of 2 modules.
 

CP08: Concept 2000 bus connector

CONSON ACCESSORIES - CP08: Concept 2000 Bus Connector
3 pin connector for connecting 2 CP09 bus cables.
 

CP09: Concept 2000 bus cable

CONSON ACCESSORIES - CP09: Concept 2000 Bus Cable
20cm bus cable (3 black wires) for vertical connection of 2 modules.
 

CP2501-2509 :Pushbuttons panels and IR-eyes

CONSON ACCESSORIES - Pushbuttons panels and IR-eyes
Concept 2000 offers a range of ergonomic push buttons with several functions. Interchangeable frames make it possible to match the colour of the push panel to suits the style of the interior. The central push button is typically used for ON/OFF while the four others are used for pre-programmed modes. The SESAM function ligth up the LED's on the push panel by the move of a hand in front it. The LED's may also light up permanently or when the push button get a response from an actor module.

CP2501 panel with 1 push button and 1 LED
CP2502 panel with 2 push buttons and 2 LEDs and IR preamplifier (38 KHz)
CP2505 panel with 5 push buttons and 5 LEDs
CP2506 panel with 5 push buttons and 5 LEDs and SESAM
CP2507 panel with 5 pushbuttons and 5 LEDs and IR preamplifier (38 KHz)
CP2509 IR preamplifier (B &O) amp; O 455 KHz)
 

CP2550-CP2554: Exchangeable frames for push button panels

CONSON ACCESSORIES - CP2550 .. CP2554: Exchangeables frames for push-buttons panel
The frames are available in following colours:

CP2550 White RAL 9003
CP2551 Blue RAL 5015
CP2552 Pink RAL 3017
CP2553 Turquoise RAL 5018
CP2554 Black RAL 9005
 

CP70C01: 1-channel UHF transmitter - key ring

CONSON ACCESSORIES - CP70C01: UHF-transmitter 1-channel remote control
CP70C01 is a RF-remote control with 1 button.

CP70C01 is shaped as a key ring and could be used to turn the lights ON/OFF, create a certain light scenes or to open a door or a garage.
 

CP70C05: 5-channels wall mounted UHF transmitter

CONSON ACCESSORIES - CP70C05: 5-channels wall mounted-transmitter
The CP70C05 is a five button UHF keypad.
 

CP70C08: 8-channel RF remote control and transmitter

CONSON ACCESSORIES - CP70C08: RF Remote control 8-channels and transmitter
The CP70C08 is an 8-channels RF remote control and also a transfer-transmitter to send the codes to other components such as the CP70C01, CP70C05, CP70C08 and the UHF link CP70C. There are 2 types of CP70C08: a black casing and gray casing. With the gray model, the transfer function is possible.
 

CP70C16: 16-channel RF remote control

CONSON ACCESSORIES - CP70C16: 16-channels RF remote controle
The CP70C16 is a 16-channels RF remote control with 16 pre-programmed codes. These codes can be changed with the transfer transmitter CP70C08.
 

XP07: Buscable horizontal connecting

CONSON ACCESSORIES - XP07: Bus cable horizontal connection
20cm bus cable (4 colors wires) for horizontal connection of 2 modules.
 

XP08: Concept 2000XP connector (4 pin)

CONSON ACCESSORIES - XP08: Four pins-connector for connecting two XP07 or XP09
Four pin connector for connection of two bus cables (XP07 or XP09).
 

XP09: Bus cable for vertical connection

CONSON ACCESSORIES - XP09: Buscable for vertical connecting
20 cm bus cable for vertical connection of 2 modules (4 black wires).
 

XP2506 - XP2506A - XP2506B: Bus push buttons panel

CONSON ACCESSORIES - XP2506 - XP2506A - XP2506B Bus push button panel
The XP2506 intelligent push button panels are connected to any actor module such as the XP24. The XP2506 is available in 2 versions. The XP2506 has 5 buttons, 5 LEDs, Sesam function and is available in 3 versions.
XP2506 – no eye for remote control
XP2506A – one IR eye for remote control (38kHz)
XP2506B – one eye for Bang & Olufsen remote control (455kHz)
For each type up to 99 pieces can be used in one Concept 2000XP system.
SESAM function lights up the LED's on the push panel by the move of a hand in front it. The LED's may also light up permanently or when the push button gets a response from an actor module.

Download the technical sheet

XP28 -XP28A - XP28B: Bus interface for push buttons

CONSON ACCESSORIES - XP28 -XP28A - XP28B: XP28 -XP28A - XP28B: Bus-Interface for push-buttons
The intelligent bus interface XP28 makes it possible to use push buttons from a number of other manufacturers. XP28 can be connected to any actor module such as the XP24.
The XP28 has 8 inputs, 8 led-outputs, 2 I/O and a temperature input and it is available in 3 versions:
XP28 – no eye for remote control
XP28A – one IR eye for remote control (38kHz)
XP28B – one IR eye for Bang & Olufsen remote control (455kHz)

XP28 is as default programmed as an XP28A. For each XP28 type up to 99 pieces can be used in one Concept 2000XP system.

Download the technical sheet